Our goal is to stay with you from the beginning to the end of the project. Exclusive & inclusive range of services to meet all required steps towards establishing your manufacturing unit. Integrated machinery database together with experienced team will promise you the optimum to breakthrough.
If you need those production units and machines that do not exist in the country, easily import these machines by us, install them at the factory, set them up, and finally have your own production line. Our collection is the largest collection abroad in the field of setting up different production units. Production lines are very numerous and specialized. There are many industrial units in operation, but depending on your requirements, the machinery of this production unit may or may not be in our area. But while cooperating with our team, you can set up all the machinery brought below or more easily just by making a call at your factory location. All machinery of the production line are mentioned accordingly, and you can view the other machinery in that field by selecting the name of each machine, and have your desired one by aid of our team.
|Apparel & Textile Machinery||Textile Machinery||Nonwoven Machines||Spinning Machines|
|Plastic Extruders||Foam Machinery||Rubber Product Making Machinery||Other Plastic Product Making Machinery|
|Injection Molding Machine||Rubber Processing Machinery||Plastic Vacuum Forming Machines|
|Paper Product Making Machinery||Paper Processing Machinery|
|Concrete Machinery||Duct Making Machine|
|The production line is a continuous process in factories or workshops; which is used to produce a final product from raw materials, or to prepare and adapt raw materials for use in the next stage of production of a final product. The set of these continuous operations can include processing, refining or assembly (assembling the components of a product).|
usually, raw materials such as metal ores or agricultural products such as food raw materials or raw textile industry raw materials (cotton, linen) require a series of preparations to be used as a raw material. For metals, these processes involve further crushing, melting, and refining. For planting material, nutrients should be removed from the husk, stem or contaminants and then sold.
The most important question that arises in the mind of an investor who has limited capital is what production can be done with this amount of capital. A product would be suitable that on the one hand, has a good profit margin and on the other hand, does not require much capital. In this section, we have introduced the main categories of the machinery of our industrial group.
|Other Metal & Metallurgy Machinery||Metal Coating Machinery||Metal Straightening Machinery||Metal Cutting Machinery|
|Metal Electroplating Machinery||Industrial Furnace||Metal & Metallurgy Machinery Part||Metal Moulding Machinery|
|Nail Making Machines|
|Brick Making Machinery||Tile Making Machinery||Board Making Machinery||Pipe Making Machinery|
|Glass Production Machinery||Gypsum Powder Machines||Plaster Making Machines||Steel Frame & Purlin Machines|
|Dry Mortar Machines||Sand Making Machinery||Other Construction Material Making Machinery||Stone Machinery|
Medical Mask Making Machine
To help people around the world fight the Corona virus, the company has designed and manufactured a medical mask production machine that can produce high quality surgical masks, introducing the main features of this fully automatic mask production line on this page.
The design of surgical masks depends on the condition. Masks are usually in three layers. This ternary material is made of a molten material of non-woven fabrics. The molten material acts as a filter that prevents germs from entering and leaving the mask. Most surgical masks have skin or wrinkles. Three pieces are used so that the user can extend the mask to cover the area from the nose to the chin. There are three different ways to apply masks on the face. The most popular is the earlobe, in which a material such as a thread or string is attached to the mask and placed behind the ear. Another case is the strap, which consists of four non-woven straps tied behind the back. The third is the headband, which is an elastic band that attaches to the back of the head.
|Snack Machines||Baking Equipment||Fish Processing Machines||Other Food Processing Machinery|
|Grain Product Making Machines||Dairy Processing Machines||Milling Machinery||Fruit & Vegetable Processing Machines|
|Food Processing Machinery Parts||Bean Product Processing Machinery||Beverage & Wine Processing Machinery||Baking Equipment|
|Wood Pellet Mill||Finger Jointer||Spindle Mould||Wood Based Panels Machinery|
|Other Woodworking Machinery||Wood Router|
|Filling Machines||Packaging Line||Multi-Function Packaging Machines||Wrapping Machines|
|Other Packaging Machines||Capping Machines||Auxiliary Packaging Equipment||Packaging Forming Machines|
Spray Bottle Making Machinery
The production and packaging of medicinal plants has found a good market in recent years; More and more people are turning to the use of medicinal plants instead of chemical drugs and the use of various drugs has made this market more prosperous than before.
To pack medicinal plants in terms of manpower, you preferably need a specialist in medicinal plants and traditional medicine, at least two workers and a marketer or sales manager.
Herbal packaging line can only include one packaging machine to wider dimensions and larger machines and more. An example of a packing machine for medicinal plants can be seen in the figure below:
In today’s world, due to the busy schedule of people, the use of semi-prepared and ready-to-cook foods has become popular among people. Products such as fried onions, fried vegetables, various stews, chicken nuggets and shans, packed fast foods and…. .
The production line of these products is relatively cheap and can be set up at a low cost. In terms of marketing and sales of these products in the growing market for these products can be imagined, whereas the market of Russia and Central Asia is a good export destinations.
Mining Machinery Crusher Other Mining Machines Mineral Separator Mine Mill Gas Generation Equipment Other Machinery & Industry Equipment Plastic & Rubber Machinery Rubber Recycling Machinery Plastic Product Making Machinery Plastic Raw Material Machinery Other Plastic & Rubber Machinery
A few more suggestions for production unit;
First, consider your interest and then evaluate the market, and after measuring the market and finding a suitable market, enter the technical discussion and create the production unit you want.
1- Packaging of medicinal plants: An offer for production that has a suitable market in and neighboring countries is the packing line of medicinal plants.
2- Production of ready and semi-prepared foods: The food industry sector is always a good market for investment and in recent years, due to the situation in the political relations of the region and new foreign markets such as Russia and Qatar have been created, this industry sounds like a good option for investment. Also, by finding foreign food in the country that is suitable for the taste of the regional people, you can produce it and create a suitable market in the country; Some Arabic, Indian dishes can be good options for production.
3- Production of healthy and organic snacks and foods: products such as fruit chips, almond snacks and nuts, packaging of nuts in suitable packages, all kinds of healthy and organic drinks and beverages such as green tea and Aloe Vera.
4- Beverage industries: The beverage industry covers a very wide range of industries, from the production of buttermilk and dairy products, to a variety of carbonated and non-carbonated beverages, pulp and…. . The good thing about this type of product is that there is a very good competitive environment and by working on new formulations and research in the field of making new drinks with different tastes, a suitable market can be provided for the products produced.
5- Production line of milk and dairy industries: Dairy industry and milk products are very diverse and have many formulations, investing in this industry has low risk and high economic benefits.
6- Mineral water and drinking water production line: Due to the shortage of water in some countries and region, investing in the water industry is one of the safest investments that has a lower risk.
7- Production line of herbal medicines and herbal pills and capsules: Due to the growing use of herbal medicines and herbal pills and capsules and substituted herbal medicines instead of industrial and chemical types, the use of this product has grown a lot and the market gained good sales.
8- Production line of paste, sauce, tomato concentrate: Tomato paste and various sauces are other food industries that have a good market and have a good justification.
9- Juice production line: Juices and fruit-based drinks will have a good market if they are presented with new formulations and appropriate quality.
10 – Fruit concentrate production line: Fruit concentrate is a top industry in the beverage industry and can be sold as a raw material.
11- Syrup and herbal syrup production line: Syrup production with new and various formulations and flavors is one of our other suggestions for production.
12- Production line of cosmetic creams and hand and face creams: Cosmetics industry has always been one of the most profitable and best-selling industries in the world, if it has a good quality and price.
13. Aloe Vera beverage production line: Aloe Vera is a plant that has received a lot of attention in recent years and has been used in various industries, including beverages. This drink has become very popular among consumers.
14- Jam production line: Jam is another product that is recommended for production that has a simple production process and good sales.
15- Production line of spices and food condiments: Pickles and food condiments are other products that are offered for production.
Wires, Cables & Cable Assemblies Copper Wire Cable Manufacturing Equipment Batteries Other Batteries Uninterruptible Power Supply (UPS)Industrial Controls Other Electrical Equipment Motors Solar Energy Products Solar Panels
The concrete production line can produce 150,000 cubic meters of product per year, including 7500 working hours. The process and operation of this device is fully automatic and is equipped with PLC and DCS system. AAC concretes are gas fired and puffed. After this step, the block is cut and used in the desired parts at a temperature above 200 ° C. This type of block has more resistance than aerated concrete.
The main equipment of the concrete production line
Step cutting process
Automatic control system
Batch production, slurry
Funnel parts and embedded parts Crane relocation, mold assembly;
Manufacturing process in lightweight concrete production line
In the first stage, the raw materials, after being stored in the silos, gradually enter the production line. Silica, lime and cement are transferred to them from the bottom surface of the silos by special alluvium and at a certain time and enter into the production line at a certain time.
Due to the fact that this product does not have a complex process method and only the percentage of mixing raw materials and some cooking times or waiting time in the autoclave are among the complexities of the production method that requires process and raw materials.
In addition, there is the issue of quality control in different parts of production, which depends on the condition of the process and raw materials. Also, the issue of quality control in different parts of production is of great importance. This is important because the product is a building material and is directly related to safety issues. It also has a mandatory national standard for the product, which makes the issue more sensitive.
Features of manufactured concrete in the lightweight concrete production line;
They have a low specific gravity
Convenience in cutting and nailing
Resistant to natural corrosives
Appropriate compressive strength to weight ratio
Speed in execution
Prevent the spread of fire
More resistance to fire than ordinary concrete
Prevent depreciation of cooling and heating systems
Saving on the use of coating materials and mortar
The textile industry in the yarn and fabric production sector, which is the main and major part of the industry, after supplying raw materials that include natural and synthetic fibers, has the following scope. Yarn production in the textile industry takes place during the spinning process, which is very diverse. If in this section we want to deal with the methods of preparing this product, we must classify it from a technology perspective.
But it is better to suffice with a few main parts:
Short fiber spinning
Long fiber spinning
This classification is according to the initial feed, in each of which there are various technologies for preparing yarn.
Spinning raw materials:
To produce a variety of fabrics and textiles, depending on the raw material, which will be yarn or fibers. The weaving process takes place, which after spinning is one of the important parts of the industry in preparing various products and its scope is wide according to the need and consumption, but in general it can be divided into three parts, which are the origin of fabrics, flooring and .. . they will be:
Mutqal fabric is a cotton fabric on which no dyeing, printing and finishing operations have been done. The fabric of Mutqal fabric is 100% cotton and the yarn used in its weaving should be uniform and free of spinning defects. Different tolerances are offered according to the national standards, the tolerance of width is 2-2%. Mutqal fabrics have a margin width of 10-50 mm with twice the density of the background blur. The maximum ahar in Mutqal fabric relative to the total weight of the fabric Equal to 3% and the amount of recycled moisture in it according to the national standard which is a maximum of 8.5% of the total weight of the fabric.
Unfinished cotton fabrics that are packaged as interwoven have different uses. Depending on which of the light, medium and heavy fabrics are produced, they will find their own applications in proportion. But in general, interwoven fabrics It can be used in two ways:
A) Direct use as a consumable fabric in the production of bags, liners, packaging and use in mattress and pillow sewing, etc.
B) Consumption as a primary unit of dyeing and printing completing units for the production of various types of fabrics such as chelvar, chit, patish, debit, sheets that are used in the following cases:
Panties: Bedding, hospital gowns, men’s shirts, underwear, tablecloths.
Patish: For underwear, women’s clothing and mattress covers.
Sheets: Used for sheets, mattresses, pillows and curtains.
The common goal in all types of yarn spinning is to put the fibers together with the help of warp.
An active group in the field of production and forming of various types of galvanized sheets.
Steel, as the most important metal used by humans, has played a very important role in recent human developments. Galvanized sheet has a special sensitivity due to the passage of the roll sheet through the zinc metal bath and the impregnation of zinc on the surface of the iron sheet, so that increasing or decreasing the thickness of zinc metal on the metal surface reduces or reduces the quality of galvanized production. According to the studies done on sheets, which due to the use of clamps and the chemical nature of this product and its removal from the industry cycle, we are witnessing significant production and consumption of steel in nowadays, which shows the support and welcoming of our community.
Design, manufacture, installation and commissioning of various production lines for paper and cardboard from paper and waste and … Including;
Box of sequins and candies
Box of string dishes
Box of meat and chicken
Trays and cardboard containers
And several other uses that will soon be added to this list and will include mandatory standards
Rice bread box
Types of biscuits
– Cake of cookies
– A box of brown bread
– Date box
– Cake box
– Cake box door
– The inner layer under the cakes
– Sugar box
– Box box
– Ice cream box
– Box of dry bread
– Containers of all kinds of fast food and outdoor foods
– Cardboard divider inside the box
– Deafening cardboard (cardboard tube)
– Binding cardboard
– Furniture making and cluster making
– Industrial boxes
– Types of craft paper
(Floating – Liner – Test liner and Wi-Fi liner) for the production of carton sheets and multilayer cardboard
– Poultry bed paper in different weights
– Gray back cardboard for match making, laundry detergent and shoe boxes, etc.
– Industrial cardboard for the use of zoning, binding, saddlery, office building
Manufacturer of the first paper and cardboard production machine with the ability to produce hygienic and standard coated cardboard + gray backed cardboard + industrial cardboard and quasi-craft papers with just one production line
In recent years, the supply and import of raw materials for production units has become a major concern along with the supply of foreign currency for production units. The reluctance of international suppliers to do business with the some countries is the main reason of such problems. Despite government support to facilitate the import of raw materials, continued work with international suppliers has led to the closure or under-capacity running of many factories in the some countries. This concern has been raised as one of the challenges of our company for several years, and with the tact and seriousness of the decision makers of this company, led for alternative approaches in this field. And now the company is proud of its ability to purchase and transport a wide range of raw sensitive materials with the cooperation of a third countries and announces its readiness to cooperate with the owners of production units. Some of these products are briefly covered in this section, although not limited to these.
Aluminum oxide or alumina (Al2O3), also called (bauxite); It is one of the important ceramic materials that has various applications in different fields. Among the various and outstanding properties of alumina, we can mention its mechanical properties such as high compressive strength and high hardness, as well as its high refractoriness. Alumina is the main material in the production of aluminum.
The high hardness of alumina causes abrasion resistance. Therefore, it is used in various applications such as corrosion-resistant coatings for pipes and ducts, pumps and valves, and fiber-conducting sheaths, wires, etc.
Alumina is used as a tip for cutting metal due to its high hardness at high temperatures.
Alumina is the most widely used abrasive, commonly used in ferrous alloys, high tensile materials, and wood. Alumina is also used as a grinding agent in a wide range of particle size reduction processes.
Other names of this product are aluminum oxide, alumina and so-called bauxite. It has the chemical formula of Al₂O₃, a chemical substance with a combination of aluminum and oxygen, and is one of the most important ceramic materials in the industry, which has many different applications in the field. Are different.
Melting point is 2072 ° C and boiling point is 2977 ° C.
The crystalline form of aluminum oxide is found in nature. We also consider aluminum oxide as an ionic compound. The electrostatic interaction between small aluminum ions and oxygen and the creation of covalent properties on the other hand, makes the bond between these ions in aluminum oxide very strong.
This oxide is insoluble in water and is one of the most important materials in the production of aluminum in industry. Alumina is used as a tip for cutting metal at high temperatures due to its high hardness and is one of the most widely used abrasives.
The mechanical properties of aluminum oxide include high compressive strength, high hardness, high melting time, high abrasion resistance, resistance to chemical attacks, high thermal conductivity, high dielectric resistance and transparency against microwave frequencies.
Aluminum metal production (90% of the aluminum oxide produced in the world is for aluminum metal production)
Production of refractory pipe coatings
Production of thermocouple sheaths
Production of catalysts, abrasives, refractories and insulators
Production of polymer heat insulation
Production of thermal conductors of plastics, rubber and adhesives
Aluminum is one of the building metals and it is alloyed with different metals and is used in the aircraft, car engine and door and window industries.
Aluminum is also used to make beverage cans. Aluminum is also used to produce aluminum foils.
Zirconia or zirconium dioxide ZrO2 is the most important and stable zirconium oxide. Pure zirconia is a white powder with a melting point of 2710 ° C and is well defined in monoclinic, tetragonal, cubic crystalline forms that are stable in three different temperature ranges. The monoclinic crystal system is stable at temperatures below 950 ° C. In the temperature range of 2370-1200 ° C, zirconia is converted from a monoclinic to a tetragonal system. The conversion of tetragonal to monoclinic is associated with an increase in volume of about 4%. Eventually, with increasing temperature at temperatures above 2370 ° C, it becomes a cubic system and a fluorite structure.
When the tetragonal structure is cooled to 970 ° C, it becomes a monoclinic structure, and conversely, when heated, the monoclinic structure becomes a tetragonal structure at 1150 ° C.
Zirconia has the highest impact resistance among ceramics under suitable microstructural and fuzzy conditions, and for this reason in cases such as ceramic shears, wire extensions, hot extrusion molds, ceramic washers, impellers for chemical transfer pumps, piston heads and Piston liner is used and also its use as a component of heat engines has prevented the engine temperature from decreasing and engine efficiency has increased. On the other hand, the amount of wear is reduced and the engine life is increased.
Stabilized zirconia due to its high melting point and excellent chemical properties is considered as a suitable refractory. The presence of unstabilized zirconia particles in refractories such as alumina increases abrasion resistance and heat shock resistance and is used in cases such as sliding gate valves in continuous steel casting equipment or nozzles and nozzles of molten outlets in intermediate pots. And makes it possible to slide bucket systems. Zirconia is a good thermal insulator in the form of fiber, paper and felt at high temperatures. Zirconia fibers, which are crystalline foils with a grain size of 0.2 microns, can withstand temperatures from 1650 to 1700 ° C.
Zirconia is also used as a main material in the manufacture of ball mill pellets, cutting scissors or cutting blades in the cutting industry in the paper industry, textile fiber guide and many other cases.
Chromium oxide is a mineral compound with the chemical formula Cr2O3, which is a combination of oxygen and chromium and is known as green chromium. Chromium oxide is naturally occurring and is a highly insoluble compound with high thermal stability and acid-base properties.
Chromium oxide is a very insoluble and heat-resistant source of chromium and is found in nature in the form of mineral scalite.
Due to its extraordinary stability, this material is used as a green pigment in inks, glass, paints, as well as as a coloring agent in the production of ceramics and to create a matte green color in glazes. Chromium oxide is used as an abrasive to polish or sharpen razor blades, knives, and the surfaces of optical devices.
Chromium is an essential mineral for humans to use glucose in the body, but its excessive consumption is toxic. We consume about 1 mg of chromium daily, and foods such as brewer’s yeast, wheat germ and offal are excellent sources of this mineral.
This chemical is used in industries for hardening of steel, production of stainless steel and various alloys. Chrome plating can be used to decorate mirrors, bathroom faucets and car covers. It is interesting to know that 90% of leathers are tanned with chrome.
Chromium produces various commercially valuable oxides in combination with oxygen, the most important of which is chromium oxide, which is called chromium trioxide or chromic acid. This compound is mainly used for chrome plating and ceramic production.
Chromium oxide is a green powder that is mainly used as a dye in industry. It can also be used as a catalyst in the oxidation of chlorinated hydrocarbons due to its high elimination activity. It is a powerful oxidant and may react strongly with some organic matter, but such compounds are often used in controlled oxidation in the synthesis of organic matter.
This chemical is non-flammable and does not react easily with other compounds. Chromium compounds, including chromium oxide, are used as industrial catalysts and pigments (to produce bright green, yellow, red, and orange colors). Rubies get their red color from chrome and glass turns emerald green with chrome.
Chromium oxide coatings or black oxide coatings are an industrial coating that are very effective as sealing surfaces as well as abrasion resistance. These coatings have high chemical resistance and are also anti-reflective.
This chemical is typically insoluble and highly stable in aqueous solutions (water), which makes them easy to produce pottery for advanced electronics and lightweight structures in aerosols and high-purity electrochemical applications. (99,999%) are useful.